Ruedamann 4FT Foldable Wheelchair Ramp

The transition panel is designed to make it easier and smoother for wheelchairs to navigate wheelchair ramps. Compared to normal hinges, a flatter, non-stumbling hinge is used, which is safer. The wheelchair ramp is equipped with a webbing handle for easy carrying and moving, providing a comfortable grip.

Flat hinges reduce the risk of tripping, and the durable hinges can still function properly even after being folded hundreds of times. The surface of the threshold ramp is covered with a high-quality non-slip emery film, which increases friction and prevents slipping. Several thick support ribs on the back increase the sturdiness and safety of the entry ramp, providing good load capacity.

The folding ramp for wheelchair is easy to store and carry, made of lightweight aluminum alloy with high hardness, toughness, and resilience, capable of holding up to 800 lb (400kg) capacity and 600 lb (300kg) impact capacity. The unfolded size is 47.6"L×30.1"W×1.8"H (121.5×76.5×4.5cm), and the folded size is 47.8"L×15"W×2.2"H (121.5×38×5.5cm).

Non-slip rubber pads are placed on the back at the top of the wheelchair ramp for safety use and to prevent slip and movement. The surface is covered with a waterproof and skid-proof grey non-slip tape, suitable for use in all weather conditions. The hinge in the middle is flat, and there is no risk of tripping.

The extended plate design at both ends allows the threshold ramp to touch the ground with a larger area, making it easier to go up the ramp. The side pipes and the middle hinge of the ramp are lengthened and beveled, providing good load bearing and not easy to cause injury. The side protection is also beveled, reducing the trouble that the door cannot be opened or closed after the threshold is set with a ramp. Both sides are orange, which is more eye-catching for safe use.

The portable wheelchair ramp can easily transfer mobility devices such as wheelchairs, scooters, trolleys, and rollators (not good for motorcycles). The recommended using height is 8"(20cm), and it is suitable for vehicles with a width less than 27.5" (70cm).

If using a two-wheel vehicle on only one side of the ramp, the entire ramp needs to be fixed to avoid the other half side bending up. There are bolts with this ramp, and you can keep the ramp from moving by putting bolts through the holes on the ramp's extension plate into the ground. Please do not walk on the hinge in the middle of the ramp or transfer mobility devices on the hinge. The warranty period of the ramp is 1 year, and artificial damage is not within the warranty period.

product information: